Old

Discontinued product

LDP-ACCUSPOT 7TC

Battery operated LED-projector, based on 7 RGB-LEDs.
SKU: B05118
EANCODE: 5420025651189

Details

Details

  • Battery operated LED-projector, based on 7 RGB-LEDs to avoid unwanted color shadows.
  • Beam angle = 25° (medium spot)
  • Projection angle can be adjusted over 90° (vertical to horizontal)
  • The perfect solution for many applications: exhibition booths, parties, special events, ...
  • Minimum 10 hours at full output on a fully charged battery
  • Each projector can be equipped with an optional “G4 W-DMX wireless DMX-module" or you can go for the cost effective solution: only use wireless DMX on the first unit and connect the other units via DMX-cable.
  • The optional Wireless W-DMX module uses a new compact antenna: no more broken antennas anymore! 
  • Projector can still be used with empty battery: just connect it to the mains!
  • Very smooth RGB color changes thanks to high freq. dimming electronics
  • The internal battery charger charges the battery while the projector is working on mains power.
  • Optional covers available:
    • The unit is delivered in black color but can be equipped with special optional white covers to adapt it to the environment it will be used in.
    • The optional covers protect the projectors against rain (IP43) so they can be used outdoor to light up trees, plants, walkways, …
  • Different working modes:
    • Standalone: custom colors selectable or automatic and beat synchronized color changes
    • Master/slave mode: up to 16 units can be used together for wonderful preprogrammed, music synchronized lightshows.
    • DMX-controlled, also wireless: 5modes, 4channels (R, G, B + Dimmer/strobe/sound chase/color macros) and 5channels (R, G, B, master dimmer, color macros, strobe channel)
    • Controlled by a small JBS LEDCON-02 controller
  • IEC mains in/outputs: easy daisy chaining of several units (if needed).

Note: For logistical reasons (different regulations for battery recycling in EU-countries) the battery is not included! The LDP-ACCUSPOT uses a standard rechargeable lead/acid battery that can be easily obtained from your local battery specialist or from major online suppliers all over Europe. In this manual you will find some links to online stores where you can buy this battery.

Technical Specifications

Technical Specifications

General : Dimensions (cm) 22.5 x 22.65 x 23.35 cm
General : Weight (kg) 5.5
General : Powerinput Battery
General : Works on battery N/A
General : Energy Label No
General : Power consumption W 32
General : Color black
General : Display LED
General : Fixation optional standard clamp
General : IP rating indoor
Control : Protocol N/A
Control : optional remote CA-8
Control : programmable No
Control : upgradable software Yes
Control : minimum DMX channels N/A
Light : lamp socket No
Light : lamp LED
Light : colors Red, Green, Blue
Light : mix colors No
Light : min. beam angle (°) 25
Light : max. beam angle (°) 25
Light : max. refresh rate (kHz) No
Connections : output N/A
Brand BRITEQ
EANCode 5420025651189

Manual & Downloads

Manual & Downloads

View FileLDP-ACCUSPOT 7TC Manual    Size: (2.57 MB)
View FileLDP-ACCUSPOT 7TC EC declaration    Size: (568.27 KB)
View FileLDP-ACCUSPOT 7TC Firmware    Size: (36.52 KB)

Reviews & References

Write Your Own Review

You're reviewing: LDP-ACCUSPOT 7TC

  1 star 2 stars 3 stars 4 stars 5 stars
Rating